MR-SPF5K-LP2-TB20T

Split Phase - IP20 - Low Frequency

RATED POWER: 5kVA / 5kW

• MPPT with up to 99.9% efhciency
• Multiple charge and discharge modes
• Multiple safety approvals available
• Support for many types of batteries
• Supports BMS communication
• Outputs pure sine wave AC power
• Industrial design with modern aesthetic look
• Easy to install and simple to use
• Support for APP remote monitoring

Leave a message

隐藏域元素占位

Overview
Specifications
Downloads
Support
概要

Expand All

MR-SPF5K-LP2-TB20T

Model		MR-SPF5K-LP2-TB20T
OUTPUT
Rated Power (W)		5000W
Nomial Output Voltage		240VAC(L1-L2) / 120VAC (L-N)
Output Voltage Range		200-240VAC(L1-L2) / 100-120VAC (L-N), (Settable)
Frequency		50Hz / 60Hz
Waveform		Pure sinewave
Transfer Time		Line Mode - Inverter Mode: <8ms; Inverter Mode - Line Mode: <8ms
Output Voltage Regulation		10% rms
Bypass Mode		Yes
Saver Mode		Yes
Efficiency		>98%
AC INPUT
Rated Capacity (VA)		6300VA
Battery Voltage		48VDC
Nominal Input Voltage		240VAC (Split phase, L1-L2)
Input Voltage Range		154VAC-264VAC
Frequency Range		50Hz / 60Hz ±5Hz(±10Hz)
PV INPUT
Solar Charger Type		MPPT
Max. PV array power		6400W
PV Input Voltage Range		60VDC-150VDC
Max. PV Open-circuit Voltage		150VDC
Max. PV Input Current		120A
BATTERY
Battery Type		Lead-acid (AGM, GEL, Flood), Lithium, User-defined
Max. AC Charging Current		50VDC
Max. Solar Charging Current		120A
Max. Hybrid Charging Current		170A
Battery Low Alarm		48V: Battery light discharge 46V; Battery load discharge 46V@load<20%; 44V@load<50%/42V@load>50%;
Battery Low Recovery		48V: Battery light discharge 48V; Battery load discharge 48V@load<20%; 46V@load<50%/44V@load>50%;
Battery Low Voltage Shutdown		48V: Battery light discharge 44V; Battery load discharge 44V@load<20%; 42V@load<50%/40V@load>50%;
Battery High Voltage Protect		62.4V
Battery High Voltage Recovery		60V
FUNCTIONS
LED Display		Line/AC mode, Inverter mode, Battery charging, Fault alarm
LCD Display		AC input data, PV input data, Output data, Battery data, Setting options, Error codes
Alarm		Low battery alarm: Beep every second; Overload alarm: Continuous beeping; Fault alarm: Continuous beeping
Protection		Input Circuit Breaker, Output Circuit Breaker, Overload Protection,Short-circuit Protection, Battery Low Voltage Protection
Overload Capacity		Load<110%, 1min; 110%<Load<130%, 20s; Load>130%, 500ms
COMMUNICATION
Embedded Interfaces		BMS(485), RS232, Dry-contact
External Modules		WiFi Module
GENERAL
Operating Temperature		-10℃ to 50℃
Storage Temperature		-15℃ to 45℃
Humidity		0-95 %, Non condensing
Noise Level		<45dB
Dimension, WHD (mm)		403 × 543 × 176